Products

REMA DIN 160A Plug 50mm2 GRY Cable Clamp AR GRY Code

REMA DIN 160A Plug with Handle 50mm2 GRY Cable Clamp AR GRY Code

REMA DIN 160A Socket 50mm2 GRY Cable Clamp AR GRY Code

REMA DIN 160A Socket with Fixed Handle 50mm2 GRY Cable Clamp AR GRY Code

REMA DIN 320A Plug 70mm2 GRY Cable Clamp AR GRY Code

REMA DIN 320A Plug with Handle 70mm2 GRY Cable Clamp AR GRY Code

REMA DIN 320A Socket 70mm2 GRY Cable Clamp AR GRY Code

REMA DIN 320A Socket with Handle 70mm2 GRY Cable Clamp AR GRY Code

REMA DIN 80A Plug 16mm2 GRY Cable Clamp AR GRY Code

REMA DIN 80A Plug with Handle 16mm2 GRY Cable Clamp AR GRY Code

REMA DIN 80A Socket 16mm2 GRY Cable Clamp AR GRY Code

REMA DIN 80A Socket with Fixed Handle 16mm2 GRY Cable Clamp AR GRY Code

ResinTech Adhesive Applicator/Dosing Gun GRY

Schlemmer Polyflex PA6 Conduit NW10 OD 13mm ID 9.9mm 50m Roll

Schlemmer Polyflex PA6 Conduit NW13 OD 15.8mm ID 12.7mm 50m Roll

Schlemmer Polyflex PA6 Conduit NW17 OD 21.2mm ID 16.6mm 50m Roll

Schlemmer Polyflex PA6 Conduit NW22 OD 25.4mm ID 21.3mm 50m Roll

Schlemmer Polyflex PA6 Conduit NW29 OD 34.5mm ID 29mm 25m Roll

Schlemmer Polyflex PA6 Conduit NW4.5 OD 7.1mm ID 5mm 100m Roll

Schlemmer Polyflex PA6 Conduit NW6 OD 9.2mm ID 6mm 100m Roll

Schlemmer Polyflex PA6 Conduit NW7.5 OD 10mm ID 6.7mm 50m Roll

Schlemmer Polyflex PA6 Conduit NW8.5 OD 11.7mm ID 8.4mm 50m Roll

Schutzinger OBD II Connector with Backshell BLK

Schutzinger

MPN : SET7471/OBD II/24V/GB/11/SW

$118.05

+GST

Sealed Buss Bar AT Receptacle 12 Way Pin-Contacts GRY IP68 150A

Sealed Buss Bar DT Receptacle 2x12 Way Pin-Contacts A and B Key GRY/BLK IP68 2x150A

Smart Battery Isolator 12V (ON 13.2V/OFF 12.7V) 100/400A with Fault Indicator LED

Ionnic

MPN : SBI-12

Smart Battery Isolator 24V (ON 26.4V/OFF 25.4V) 100/400A with Fault Indicator LED

Ionnic

MPN : SBI-24

Solenoid Continuous Duty 12V Change Over 100/100A

Ionnic

MPN : 15-323

Solenoid Continuous Duty 12V Normally Open 100A

Ionnic

MPN : 15-132

Solenoid Continuous Duty 12V Normally Open 300A

Ionnic

MPN : 15-133

Solenoid Continuous Duty 12V Normally Open 80A

Ionnic

MPN : ST85

Solenoid Continuous Duty 24V Change Over 100/100A

Ionnic

MPN : 15-326

Solenoid Continuous Duty 24V Normally Open 100A

Ionnic

MPN : 15-269

Solenoid Continuous Duty 24V Normally Open 300A

Ionnic

MPN : 15-141

Solenoid Continuous Duty 24V Normally Open 80A

Ionnic

MPN : ST88

Solenoid Intermittent Duty 12V Normally Open 200A

Ionnic

MPN : 15-3F

Solenoid Marine Continuous Duty 24V Normally Open 65A PVC Dipped

Ionnic

MPN : 24063-08

Song Chuan Micro 280 Relay Change Over 5 Pin 10A 24V

Ionnic

MPN : PB2524RMC

Song Chuan Micro 280 Relay Change Over 5 Pin 20A 12V

Song Chuan

MPN : PB2512RMC

Previous 1 … 58 59 60 61 62 … 74 Next

When ordering a connector it is not always as simple matter of determining between 'male' and 'female' because this can refer to both the housing gender and the contact gender. Many manufacturers offer a given housing gender with both pin and socket. A common example of such confusion occurs in the Deutsch Industrial DT range, where the plug (or male connector) actually contains socket (or female) contacts. For this reason please specify both the contact and housing gender at the time of order.

The IP Rating of a connector or accessory relates to the degree of ingress protection provided by that component. The first digit of the code relates to the degree of protection against access to hazardous parts (conductors etc) and against solid foreign objects. The second digit refers to the degree of protection against the ingress of water. For two examples of this system, consider the most commonly seen IP ratings in our products: IP44 and IP67. IP44 4: Protection from solid objects ≤1mm | 4: Protection against splashing water IP67 6: Protection from dust-sized objects | 7: Protection against immersion in water at depth of 1m for 30mins A complete guide to all IP Ratings is available here.

These terms are used by Phase 3 and ITT Veam on their high-current connectors.The source is considered the half of the connection from which the power is sourced; or the half supplying the electrical power. In an emergency power application, the generator is the source and would be fitted with Panel Source (panel-mount) connectors, a Panel Source Powersafe Box, or Line Source (inline) connectors on pigtails. The drain is the half of the connection which drains the power from the source. In the same emergency power application described above, the network receiving the emergency power supply is the drain and would be fitted with Line Drain connectors, Panel Drain connectors or a Panel Drain Powersafe Box.

We commonly deal with both American Wire Gauge (AWG) and square millimetre (mm2) dimensions as the units used by manufacturers can vary. To convert between measurements please refer this conversion chart.

Supplying Connector solutions throughout Australia