Anderson Airmotive Aircraft Connectors

MS3349 Airmotive Connector

Anderson Airmotive is known as an innovative leader in the Ground Power industry with over 60 years of experience in product design and manufacturing. Today they continue the tradition of design and manufacturing excellence by producing and offering the largest selection of qualified plugs, cable assemblies and receptacles covering all commercial and military requirements for 28VDC, 270VDC, 80VDC, 200VAC and 400VAC.


  • Attachable® plugs designed to be simple to assemble in the field, durable and cost effective with many options for safety and protection
  • Rugged receptacles with a choice of male or female design
  • Wide variety of complete cable assemblies with either Attachable® or over-molded heads


Anderson Airmotive Catalogue (10.9Mb)

Request a quote on any of our Anderson Airmotive products.

Product Filter
Anderson SB350 350A Housing 2 Way BLU
Anderson SB350 350A Housing 2 Way BLU
Anderson Power Products
MPN : 912-BK
Anderson Airmotive R67 CBL Plug 6 Way Socket-Contacts BLK MS25486 400Hz - Connector-Tech ALS
Anderson Airmotive R67 CBL Plug 6 Way Socket-Contacts BLK MS25486 400Hz
Anderson Airmotive
MPN : R67G36E

When ordering a connector it is not always as simple matter of determining between 'male' and 'female' because this can refer to both the housing gender and the contact gender. Many manufacturers offer a given housing gender with both pin and socket. A common example of such confusion occurs in the Deutsch Industrial DT range, where the plug (or male connector) actually contains socket (or female) contacts. For this reason please specify both the contact and housing gender at the time of order.

The IP Rating of a connector or accessory relates to the degree of ingress protection provided by that component. The first digit of the code relates to the degree of protection against access to hazardous parts (conductors etc) and against solid foreign objects. The second digit refers to the degree of protection against the ingress of water. For two examples of this system, consider the most commonly seen IP ratings in our products: IP44 and IP67. IP44 4: Protection from solid objects ≤1mm | 4: Protection against splashing water IP67 6: Protection from dust-sized objects | 7: Protection against immersion in water at depth of 1m for 30mins A complete guide to all IP Ratings is available here.

These terms are used by Phase 3 and ITT Veam on their high-current connectors.The source is considered the half of the connection from which the power is sourced; or the half supplying the electrical power. In an emergency power application, the generator is the source and would be fitted with Panel Source (panel-mount) connectors, a Panel Source Powersafe Box, or Line Source (inline) connectors on pigtails. The drain is the half of the connection which drains the power from the source. In the same emergency power application described above, the network receiving the emergency power supply is the drain and would be fitted with Line Drain connectors, Panel Drain connectors or a Panel Drain Powersafe Box.

We commonly deal with both American Wire Gauge (AWG) and square millimetre (mm2) dimensions as the units used by manufacturers can vary. To convert between measurements please refer this conversion chart.