Product Filter
  • 5.01 - 20.00mm2
Anderson SB50 GRY to Staubli MC4 Lead 6mm2 LAPP Solar Cable 0.5M
CTALS
MPN : LEAD200
$26.26
+GST
Anderson SB50 GRY to Staubli MC4 Lead 6mm2 LAPP Solar Cable 1M
Anderson SB50 GRY to Staubli MC4 Lead 6mm2 LAPP Solar Cable 1M
CTALS
MPN : LEAD201
$25.60
+GST
Anderson SB50 RED to Staubli MC4 Lead 6mm2 LAPP Solar Cable 10M
Anderson SB50 RED to Staubli MC4 Lead 6mm2 LAPP Solar Cable 10M
CTALS
MPN : LEAD216
$87.72
+GST
Anderson SB50 GRY to Staubli MC4 Lead 6mm2 LAPP Solar Cable 10M
CTALS
MPN : LEAD206
$86.51
+GST
Anderson SB50 GRY to Staubli MC4 Lead 6mm2 LAPP Solar Cable 3M
CTALS
MPN : LEAD203
$39.14
+GST
Anderson SB50 GRY to Staubli MC4 Lead 6mm2 LAPP Solar Cable 5M
CTALS
MPN : LEAD205
$52.67
+GST
Anderson SB50 GRY to Staubli MC4 Lead 6mm2 LAPP Solar Cable 2M
CTALS
MPN : LEAD202
$32.37
+GST

Anderson Plug Leads In Stock Today

We stock a number of Anderson plug leads that are generally required as an extension to connect batteries. The 12-volt Anderson extension leads are commonly used for camping, trailers, dual battery and solar applications. They are available in varying lengths to fit your purpose.

If you can’t find what you are looking for below, please enter the details in ‘Search Our Store’ above and we will navigate through our vast range to find the best fit for you. If you still cannot find the part you need, please do not hesitate to contact our friendly customer service team and we will point you in the right direction.

When ordering a connector it is not always as simple matter of determining between 'male' and 'female' because this can refer to both the housing gender and the contact gender. Many manufacturers offer a given housing gender with both pin and socket. A common example of such confusion occurs in the Deutsch Industrial DT range, where the plug (or male connector) actually contains socket (or female) contacts. For this reason please specify both the contact and housing gender at the time of order.

The IP Rating of a connector or accessory relates to the degree of ingress protection provided by that component. The first digit of the code relates to the degree of protection against access to hazardous parts (conductors etc) and against solid foreign objects. The second digit refers to the degree of protection against the ingress of water. For two examples of this system, consider the most commonly seen IP ratings in our products: IP44 and IP67. IP44 4: Protection from solid objects ≤1mm | 4: Protection against splashing water IP67 6: Protection from dust-sized objects | 7: Protection against immersion in water at depth of 1m for 30mins A complete guide to all IP Ratings is available here.

These terms are used by Phase 3 and ITT Veam on their high-current connectors.The source is considered the half of the connection from which the power is sourced; or the half supplying the electrical power. In an emergency power application, the generator is the source and would be fitted with Panel Source (panel-mount) connectors, a Panel Source Powersafe Box, or Line Source (inline) connectors on pigtails. The drain is the half of the connection which drains the power from the source. In the same emergency power application described above, the network receiving the emergency power supply is the drain and would be fitted with Line Drain connectors, Panel Drain connectors or a Panel Drain Powersafe Box.

We commonly deal with both American Wire Gauge (AWG) and square millimetre (mm2) dimensions as the units used by manufacturers can vary. To convert between measurements please refer this conversion chart.